产品资料

欧泰克C8型自动出锡焊台

如果您对该产品感兴趣的话,可以
产品名称: 欧泰克C8型自动出锡焊台
产品型号: C8
产品展商: 其它品牌
产品文档: 无相关文档

简单介绍

欧泰克C8型自动出锡焊台 C8自动上锡焊台 自动送锡机 自动出锡焊台 C8自动送锡焊台 欧泰克自动送锡机 自动出锡机


欧泰克C8型自动出锡焊台  的详细介绍

欧泰克C8型自动出锡焊台

C8型自动出锡焊台详细资料

 

1 .把烙铁头安装(固定)在设备上,通过机械送锡丝之烙铁头尖部(无需一手拿锡丝,一手拿烙铁手柄),这样作业员可以空出两只手,然后用来握住需要焊锡的工件;(解放双手,让生产更有力)

2.“脚踏开关”控制送锡丝;(步进电机精准送锡,节省锡丝,焊点饱满)

3. 两种控制送丝方式:1、自动送锡丝:开关一次,固定送丝长度,循环工作; 2、人工控制送丝:压住开关送丝,松开开关送丝停止;

4. 送丝长度任意设置(自动模式下通过设置送丝时间实现);

5. 送丝速度任意设置,根据需要可快可慢;

6. 进丝位置可以旋转到烙铁头360度的任意角度;

7. 机头(烙铁头角度)高矮可调;

8. “焊锡大师”牌送锡焊台自动送锡准、升温快,受到广大用户好评。

欧泰克C8型自动出锡焊台 适用范围

此类产品适合于焊接:DB头、cable、USB、通讯连接器与电线电缆的焊接。

安装方式

一、分体安装方式:机头安装在工作台面上,将控制器安装在其他合适的位置。

二、一体安装方式:将机头和控制器安装在一起(此类安装是出厂标准安装方式)。

 

输入电压:AC220V/110V

输出电压:AC24V

电子发热芯功率:80W

温度范围:150℃―500℃

空载温差:±2℃

焊锡咀与接地电阻:≤2Ω

焊锡咀漏电压:≤2mV

可选用焊锡咀:Q1系列(参考产品分类“烙铁头”项目下Q1系列规格)

密码设置范围:001―999(000无密码)

休眠温度范围:50℃―≤设置温度

休眠时间范围:1―60min

人工校温范围:-99℃―99℃

欧泰克C8型自动出锡焊台
automatic solder feed station  automatic solder feed station

 Product description

1) The new design concept
Upgrade version of send solder soldering stations, send solder construct, heating element and solder tip and solder tube installation are all new design concept.
Fixed the soldering tip on the machine, it can feed solder to the head of soldering tip automatically (no need one hand with solder, another hand hold solder handle),so this permit operator hold the solder equipment with two hands.

2) avoid Soldering explode function
C9 automatic feed soldering station punch hole on the solder can eliminate solder wire generated gas when melting, reduce the soldering splash (different solder match with different solder tube);

3) flexible, scientific working principle
Soldering tube and solder tip precision combined with an organic whole won’t shift.
Can also separate install the controller and soldering tip, send solder construct, effective save operation space;
feeding solder position can be rotating 360 °around solder tip, rotate to soldering tip of arbitrary Angle;
Solder tip, solder wire tube Angle, height arbitrary adjustable, suitable for the different height operators application.

4) Two ways of solder feeding
1.Auto solder feeding: open the switch, fixed solder wire length, cycle operation
2.Manual solder feeding: press the switch to feeder solder, loose switch to stop solder feeding
3.Freely set solder feeding length (under AUTO model, achieved by setting solder feeding time)
4.Freely set solder feeding speed, quick or slow per requirement

Technical parameters

model C8 C9
Input voltage AC220V/110V
Output voltage AC24V
Heater power 80W
Temperature rangge 150℃~450℃
no-load temperature difference ±2℃
The tips and grounding resistance: ≤2Ω
soldering tip leakage voltage ≤2mV
Soldering tip type X1 series
Password setting range 001~999(000 no password)
Sleeping temp. range 50℃~≤ setting temp.
Sleeping time set range 1~60min
Manual adjust temperature range -99℃~99℃
Soder Dia (selective) 0.5/0.6/0.8/1.0/1.2/1.5/1.6mm

(Different solder wire match different solder tube)
 
Application range Soldering application range: B head, cable,USB,Communication connector and electric wire.

 

 

C8 structure diagram

1)      soldering tip height can be adjustment;

2)      solder wire tube angle can be rotate around 360 degree

Segregate install method

C8 configuration introduction

Automatic soldering station host

Footswitch

Power line

Clean sponge

Solder anti-splash function: Eliminate high temperature splash and improve soldering quality


Tags: automatic solder feed station,soldering station

 

产品留言
标题
联系人
联系电话
内容
验证码
点击换一张
注:1.可以使用快捷键Alt+S或Ctrl+Enter发送信息!
2.如有必要,请您留下您的详细联系方式!

粤公网安备44030602002351号